- 8 -
B. USB Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE - Windows ME & Windows 2000 :
•
Turn on your system and wait for Windows to finish booting.
•
Insert the driver floppy disk into the floppy disk Drive
•
Insert USB cable to an open USB port on your computer.
Follow steps listed below to complete installation:
•
A
“New Hardware Found”
window will guide you through
installation of driver. When prompted for driver disk,
Check
"
Floppy
disk drives”
box, and uncheck all other boxes. Insert
Install Disk in floppy drive then click
Next
.
C. USB 2.0 Interface Installation
NOTE : using USB ports repeated on some peripherals
(such as keyboards).
May cause quick discharge.
Windows 98SE :
•
Turn on your computer and wait until it has finished booting.
•
Connect USB end of USB cable to a free USB port on your
computer
•
A
“New Hardware Found”
window will guide you through
installation of driver. When prompted for driver disk, Check
"
Floppy
disk drives”
box, and uncheck all ot
