13
3. Installing the USB Driver
3.
1
Windows ME, Windows 2000 & Windows XP users
No driver needed.
Note:
the USB 2.0 mass storage driver is already available on these versions of the Windows operating
system. When you plug in the USB cable to your computer, it will ask you if you would like to install the driver
for the mass storage device. Just click on “OK” and follow the on screen instructions. After this, your DEx-
DVD-RW is ready for use.
3.2 Windows 98 SE users
Turn on your computer and let Windows 98SE boot up. Now insert the USB cable into an open USB 2.0 port
on your computer. Follow the steps listed below to install the software driver.
This Wizard searches for new drivers for:
ARCHOS USB 2.0
.
Click
Next
.
Select
Search for the best driver for
your device (Recommended)
.
Click
Next
.
Check
Floppy disk drives
box, and
uncheck all other boxes.
Insert the DEx DVD-RW 2 driver diskette
into the floppy drive and then click
Next.
14
Window will display the name of the
driver.
Click
Next
.
The driver is now being loaded into the
computer. Wait patiently, this may take a
minute or so.
The driver for your DEx DVD-RW 2 is
now installed. To close the Wizard, click
Finish
.
