ARCHEAN DCIL-K200, Инструкция по установке и эксплуатации, Страница: 6 / 12

6
5. Mark the 4 fixing points for drilling.
6. Drill and fix the driver in place using
the screws provided.
7. Install the power supply close to
a power socket outlet using the
supplied mounting bracket and
fixing screws.
5. Check the cable route to the driver location, especially cable length
to other components and access through the counter top.
6. Place the driver in the correct location under the staff counter.
9. Route all the cables neatly to the driver using trunking or cable
tacking as necessary.
8. Connect all components together by following the below:
Fixing points
Insert the
power supply
here
MIC
Connect
microphone
LED
Insert the 3-way
connector for
halo LEDs (if halo
indicator microphone
is installed)
LOOP
Connect to the
Hearing Loop Aerial
POWER
Flange for mounting
underneath counters
(features 4 holes for
screw installation)