Decking
Assembly
2
Archatrak Inc.
D E C K I N G
Assembly
5
At all points where the SE pedestals are under deck frame components, place a
rubber pad directly above on surface of frame.
5.1
Rubber pads placed at planter bracket location are
cut in half, with half going on either side of planter
bracket.
5.2
Using a box cutter knife, remove all 4 spacer tabs
on the four pads located in the corners and pads
cut in half at planter brackets.
5.3
All other rubber support pads require
two tabs to be removed. Cut off tabs
parallel to deck frame perimeter.
I
4
Attach planter brackets and middle bracket to StreetDeck perimeter frame.
If StreetDeck does not have planters, you may skip this step and go to step 5.
Sidewalk Edge
4.1
Using 2 hex head bolts and flange nuts per
planter bracket , attach planter brackets to
perimeter beams and corner plates in pairs per
planter location. Planter
brackets in each of the
four corners should have curved bottoms facing
the bracket it’s paired with. The remaining four
planter brackets should have curved bottoms
facing away from the corners.
G
K
K
L
K
K
K
K
K
K
K
K
4.2
Using 2 hex head bolts and flange nuts , attach
middle bracket to crossbeam and middle plate.
G
L
L
Sidewalk Edge
