arcelik BEKO CCE3220 Series, Руководство по обслуживанию

Страница: 30 / 76

30
Commutator
Electric, turbo and multifunctional ovens, heaters, hotplate, oven lamp, fan motor, chicken
roasting in the oven, such as engine components, optionally allows you to run. Is dependent on
the control button works with their movements.
Thermal cut out
The purpose of the thermal cutter or on the furnace when the thermostat shorted as a result of
any short circuit of the heater in case of continuous operation of the furnace temperature does
not exceed a certain value used to phase or neutral cutting purposes. Thermal circuit breaker is
mounted on the oven temperature to form a reference point for the regular oven is not just a
normal situation when trying to break the loop must be cut in half.
Turbo Heater
Turbo and multifunctional ovens, oven on the wall in the back of the chassis embedded resistor
(heating element). This air is drawn over the surface with the aid of suction holes and the
suction holes on the rear wall with vent holes blown. Trays heated air through the upper and
lower surfaces of the cooking event would take place. The heating element and the fan, the
control button on the control panel is controlled by the oven heater.