Dishwasher / User’s Manual
41 / 59 EN
Operating the product
“WLAN Setup: Off”.
•
Restart the application by
connecting to your home network
again through your smart
device. You can start using your
dishwasher, whose wireless
connection setup you have made,
via your smart device.
C
After performing the initial
wireless connection setup
for your dishwasher, you
do not need to perform the
setup again as long as you
do not change the name or
the password of the home
network.
In order to disable the wireless
connection feature, switch the “WLAN:
On” setting in the Settings menu to Off
by pressing the Quick Wash key. When
you enable it again, your machine will
connect to the home network by using
the setup settings you made before.
Troubleshooting
Follow these instructions if you
encounter a control or connection
problem. If it persists, take the next
step.
1. Check if your smart device is
connected to the relevant home
network.
2. Close the HomeWhiz application
on your smart device and start it
again.
3. Restart your smart device.
4. Go to the settings menu of your
dishwasher and check the wireless
connection status. If you see
“WLAN: Off”, switch it to “WLAN:
On” and wait for the machine to
connect. Then close the HomeWhiz
application on your smart device
and start it again.
5. If the connection cannot be
established following the
instructions above, repeat the initial
setup settings on the product.
6. If the problem persists, contact the
authorised service.
HomeWhiz
Using the HomeWhiz function, your
smart device can perform all the
actions on your Dishwasher except
for the child lock. You can perform
instant status monitoring and receive
notification e-mails.
C
Wireless connection function
of the machine must be on
in order to be able to use the
HomeWhiz function.
C
While the HomeWhiz
function is enabled, you can
only perform On / Off actions
and status monitoring on the
machine.
C
If the HomeWhiz function
is off, you can perform all
the operations through the
machine but you can perform
only status monitoring via
your smart device.
You can check if the HomeWhiz
function is enabled or disabled by
checking the function indicator located
on the key. Function frame on the
key will be dim in cases where the
HomeWhiz function cannot be enabled.
For example, when the wireless
connection setting is off or the door of
the machine is open.
