arcelik 9124 N, Руководство пользователя

Страница: 57 / 60

EN / 57
Washing Machine / User’s Manual
Problem Cause Solution
Detergent residue
in the detergent
drawer. (**)
Detergent was put in wet
drawer.
• Dry the detergent drawer before putting
in detergent.
Detergent has gotten damp. • Keep detergents closed in an
environment free of humidity and do not
expose them to excessive temperatures.
Water pressure is low. • Check the water pressure.
The detergent in the main wash
compartment got wet while taking
in the prewash water. Holes of the
detergent compartment are blocked.
• Check the holes and clean if they are
clogged.
There is a problem with the
detergent drawer valves.
• Call the Authorised Service Agent.
Detergent was mixed with the
softener.
• Do not mix the softener with detergent.
Wash and clean the drawer with hot water.
Regular drum cleaning is not applied. • Clean the drum regularly.
Too much foam
forms inside the
product. (**)
Improper detergents for the
washing machine is used.
• Use detergents appropriate for the
washing machine.
Excessive amount of detergent is used. •
Use only sufficient amount of detergent.
Detergent was stored under
improper conditions.
• Store detergent in a closed and dry location.
Do not store in excessively hot places.
Some meshed laundry such
as tulle may foam too much
because of their texture.
•
Use smaller amounts of detergent for
this type of item.
Detergent was put in the
wrong compartment.
• Put the detergent in the correct
compartment.
Softener is being taken early
by the product.
• There may be problem in the valves or in
the detergent drawer. Call the Authorised
Service Agent.
Foam is overflowing
from the detergent
drawer.
Too much detergent is used. • Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
• Put detergent into the product suitable for the
programmes and maximum loads indicated
in the “Programme table”. When you use
additional chemicals (stain removers, bleaches
and etc), reduce the amount of detergent.
Laundry remains
wet at the end of
the programme. (*)
Excessive foam has occurred
and automatic foam absorption
system has been activated due
to too much detergent usage.
• Use recommended amount of detergent.
(*) The product does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the product and to its surrounding
environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly.
CAUTION!
• If you cannot eliminate the problem although you follow the
instructions in this section, consult the dealer or the Authorised
Service Agent. Never try to repair a nonfunctional product yourself.