11/39EN
Refrigerator / User Guide
4 Installation
4.3. Power connection
A
WARNING:
Do not use extension or
multi sockets in power connection.
B
WARNING:
Damaged power cable
must be replaced by Authorized
Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
•
Our firm will not assume responsibility
for any damages due to usage without
earthing and power connection in
compliance with national regulations.
•
The power cable plug must be easily
accessible after installation.
•
Do not use multi-group plug with or
without extension cable between the wall
socket and the refrigerator.
C
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes
to improve the cooling system.
Refrigerant with high temperatures
may flow through these areas,
resulting in hot surfaces on the
side walls. This is normal and does
not need any servicing. Please pay
attention while touching these
areas.
4.4 Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.
1.
To attach the wedges, remove the
screws on the product and use the screws
provided with the wedges.
2.
Attach 2 plastic wedges on the
ventilation cover shown as j in the figure.
