Service Support Spirit
64
Unique Solution
WWW.ARCBRO.COM
【
F8
】
Submit:
After parameters are set, press this key to generate machining program.
13.4. User Defined Module
User is allowed to customize module with the following method .
1)
Firstly, it is required to edit a standard program for the self-defined module and name it as
TK17S.NC, which should have the following structure:
G92 X0 Y0 // User-defined module, Note: The original program should not have more
than 59 lines.
G28 // The last line should command the torch to return to the reference
point.
M02
2)
Simply copy this program into the file system. The 17th pattern element is self-defined. If no
new module is self-defined, the system will take the old module automatically.
3)
This module is allowed to use for Layout and Rotate features, but no parameter to set .
Fig. 13.3 Schematic diagram of part layout
