Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
21
3-- Connect the system cable.
F7600W CNC System: Two cables and a network cable need to be connected.
Connect CN1 and CN2 and network cable interface.
Step 6: Adjust the flatness of the machine.
In order to ensure the smooth operation of the machine, the machine needs to be adjusted
flatness.
Adjust the flatness of the machine through the adjustment screw of the foot, to make sure:
a-
the 2 track on same horizontal level [The level precision request: ±0.5mm];
b-
The overall flatness of the machine
≤
1;
The adjustment screw
