background image

4

5

E

n

g

li

sh

Safety guidelines

SAFETY INSTRUCTIONS

This  product  is  designed  and  manufactured  to  meet  strict  quality 
and safety standards. However, you should be aware of the following 
installation and operation precautions:

1. Take heed of warnings and instructions

You  should  read  all  the  safety  and  operating  instructions  before 
operating this appliance. Retain this handbook for future reference and 
adhere to all warnings in the handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous. Do not use 
the appliance near water – for example next to a bathtub, washbowl, 
kitchen sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the 
enclosure  through  any  openings.  Liquid  filled  objects  such  as  vases 
should not be placed on the equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, 
or  in  an  enclosed  bookcase  or  cabinet,  since  ventilation  may  be 
impeded. We recommend a minimum distance of 50mm (2 inches) 
around  the  sides  and  top  of  the  appliance  to  provide  adequate 
ventilation.

5. Heat

Locate  the  appliance  away  from  naked  flames  or  heat  producing 
equipment  such  as  radiators,  stoves  or  other  appliances  (including 
amplifiers) that produce heat.

6. Climate

The appliance has been designed for use in moderate climates.

7. Racks and stands

Only  use  a  rack  or  stand  that  is  recommended  for  use  with  audio 
equipment. If the equipment is on a portable rack it should be moved 
with great care, to avoid overturning the combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp, lint-
free cloth. Do not use paint thinners or other chemical solvents for 
cleaning.

We do not advise the use of furniture cleaning sprays or polishes as 
they can cause indelible white marks if the unit is subsequently wiped 
with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type described 
in the operating instructions or as marked on the appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not likely to be 
walked on or pinched by items placed upon or against them, paying 
particular attention to cords and plugs, and the point where they exit 
from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods 

If  the  unit  has  a  standby  function,  a  small  amount  of  current  will 
continue to flow into the equipment in this mode. Unplug the power 
cord of the appliance from the outlet if left unused for a long period 
of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the appliance, turn 
the power off immediately and unplug the unit from the wall outlet. 
Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that described 
in this handbook. All other servicing should be referred to qualified 
service personnel.

16. Damage requiring service

The  appliance  should  be  serviced  by  qualified  service  personnel 
when:

A. 

the power-supply cord or the plug has been damaged, or

B. 

objects have fallen, or liquid has spilled into the appliance, or

C.  the appliance has been exposed to rain, or
D. 

the appliance does not appear to operate normally or exhibits a 
marked change in performance, or

E. 

the appliance has been dropped or the enclosure damaged.

SAFETY COMPLIANCE

This product has been designed to meet the EN60065 international 
electrical safety standard.

Содержание DV27A
























Отзывы: