![background image](http://html1.mh-extra.com/html/arcam/av9/av9_custom-installation-manual_2963557004.webp)
CI Guide AV8/9 V1
Page
4 of 7
Pembroke Avenue, Waterbeach, Cambridge, CB5 9QR, England
Tel +44 (0) 1223 203200 Fax +44 (0) 1223 863384
Zone 2 on screen menus when viewed from Zone 2
The AV8 will supply a Composite or S-video feed to a Zone 2 location and will
also provide a Zone 2 on-screen menu to the second location, below you will
see an explanation of the menu and the various control options available.
Zone 2 Main Menu
Vol:--------------------I- +0dB
Audio input : DVD
Video input : DVD
Record to Tape : Source
Record to VCR : Source
Zone 1 Status : On
Zone 1 Volume : +0dB
Zone 1 Audio : CD
Zone 1 Video : DVD
The current volume setting of Z2
The current Audio input Selected
The current Video input Selected
Allows any input to be dirrected to the Tape output
Allows any Analogue input together with video to be dirrected to the VCR output
Indicates the operation status of Zone 1 status will be seen a ON (in-use) of Off
Indicates the current volume level of Zone 1 and can be adjusted from Zone 2,
this facility can be locked out within the Zone 2 settings page of the full set-up menu.
Indicates and allows the adjustment of the audio selection within Zone 1, this
feature can be locked out within the Zone 2 settings page of the full set-up menu
Indicates and allows the adjustment of the Video selection within Zone 1, this
feature can be locked out within the Zone 2 settings page of the full set-up menu
AV8 and AV9 front panel Headphone output as Zone 2 monitor
It is possible to monitor the Zone 2 audio output from the front panel
headphone output.
1. Press
the
Menu
button <Not Hold>.
2.
Turn the volume control towards the right until
Main Menu Screen 3
can be seen
on the front panel VFD or Video monitor. See diagram
below.
3. Press
the
Down Arrow
until the
Headphone Out
option is
highlighted
now use the Volume control to select
Zone 2,
press
Menu
to exit and
Store
.
Main Menu Screen 3
Zone 2
Vol:--------------------I- +0dB
Headphone out: Zone 2
Zone 2 Audio : CD
Zone 2 Video : None
Zone 2 status : On
Tip:
This is also a useful feature when used to diagnose that a Zone 2
source feed is operating even if no audio is heard within Zone 2 itself, i.e. the
fault may be within the cabling loom to Zone 2.