Version 2.
⚫
Child protect mode
To avoid your settings being changed, a child protect mode has been built-in.
The timer control will be locked and LCD screen will indicate
‘CP’
※
Activating CP mode
Hold down both
‘ENTER’
&
‘II / DEL’
button for 3 seconds. (Fig.17)
※
De-activating CP mode
Hold down both
‘ENTER’
&
‘II / DEL’
button for 3 seconds.
peration:
ON/OFF Function:
On the remote control select the desired unit by pressing the
‘Unit’
button.
Press the ‘ON’ button on remote control, the lights will gradually illuminate.
Press the ‘OFF’ button on remote control, the light will gradually turn OFF.
Dimming Function:
1.
Make sure the load (light) is switched ON.
2.
On the remote control press the ON button again, the loads will start to dim.
3.
To stop at the desired brightness level, press the ON button again.
※
Dimming level dims in cycle, during the cycle if no signal is given
『
with 4 cycles it will stop at
100% brightness
』
.
！
After setting a dim level using the remote control the light is then switched OFF, the next time that
the light is switched back ON again the load (light) will return to the previous stipulated brightness.
O
