ARC Laetus, Руководство пользователя, Страница: 2 / 6

Charging the headphone
The headphone contains a lithium rechargeable battery. Charge the headphone by using the USB to
micro USB cable.

Open the cover of the USB charger connector.

Connect the small end of USB cable to the headphone, then connect the large end to the
adaptor and plug into AC outlet.

Make sure that the indicator (red) on “Power” button lights up.

Charging is completed in about 2.5 – 3 hours* and the indicator (red) goes off automatically.
*Time required for charging the empty battery to its full capacity.
Using the headphone
Open and Pair the headphone

Press the “Power” button for 1.5 seconds to turn on headphone.

Turn on the Bluetooth function of your device and select “Arc Laetus” from the device list.

If your device requires a password, enter “0000”.

When the pairing is completed, the voice indicator will say “connected”.
Wear the headphones

Slide the earcups to fit your size.

Use the letters “L” and “R” to distinguish left and right.
Playback music on the headphone

Play music on the paired device.

Adjust the volume on the paired device.

To increase the volume, press “+” button repeatedly until the volume reaches a desired level.

To decrease the volume, press “-” button repeatedly until the volume reaches a desired level.

When volume reaches the maximum level, music will fade-out, the voice indicator “Maximum
Volume” sounds, then music will fade-in again.

Move a track forward, press and hold “+” button for 2 seconds.

Move a track backward, press and hold “-” button for 2 seconds.
Make Phone calls on the headphone

Making a call

Dial at the paired device.

Press “+” or “-” button to adjust the volume.

To end a call by pressing “Phone” button.