ARC FLEX ECO 12S, Инструкция по эксплуатации

Страница: 21 / 36

Flex ECO 6S/X MRX Instruction Manual
August 2017 v1.0
Page 20 of 34
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
1 2 3 4 5 6 7 8
ON DIP
S3 DIP 7~8
4.2.2.6 Brake Function (Flex ECO 6X only)
When the transmitter pushbutton is released from 2
nd
speed up to 1
st
speed, both 1
st
and 2
nd
speed output relays will open for up to 1 second and then with 1
st
speed
output relay closed thereafter. Refer to section 4.2.3.1 on how to set to this function.
4.2.2.7 External Warning Function
The user can install an external warning device (rotating lights, horn, etc…) to the
K10 Function output relay located inside the receiver. The user can choose which
pushbutton pair (or pairs) triggers the external warning device when pressed. Refer
to section 4.2.3.1 on how to set to this function.
4.2.2.8 Momentary Contact
When pushbutton is released the corresponding output relay will open or deactivate.
This type of relay action usually applies to external applications such as horn and
buzzer. Refer to section 4.2.3.2 on how to set to this function.
4.2.2.9 Toggled Contact
When pushbutton is released the corresponding output relay will maintained contact
or closure until next time the user presses the same pushbutton again. This type of
relay action usually applies to external application such as lights. Refer to section
4.2.3.2 on how to set to this function.
4.2.2.10 Receiver Channel Scanning Function
(1) → “00” manufacture preset (channel X)
(2) → “01” scans 2 channels (channel X and channel X+1)
(3) → “10” scans 3 channels (channel X… channel X+2)
(4) → “11” scans 4 channels (channel X… channel X+3)
* Channel X → channel set on the Channel dipswitch.
** Please contact ARC representative if your application requires scanning more than 4 channels.
Example:
If the first 6 dipswitch positions are set to channel 01 (000001), when set to 2-channel
scanning (type-2 above) the receiver will only scan channel 01 and 02.