ARC DG-O FORTE, Инструкция по установке и эксплуатации

Страница: 7 / 8

PHOTO BEAM
PRESS AND HOLD P
→
IT DISPLAYS “ P1 ”, PRESS ONCE, IT DISPLAYS
“ P2 ”, PRESS P AGAIN TO SHOW THE CURRENT SITUATION. PRESS
TO INCREASE THE FORCE ONE DEGREE AND PRESS TO DECREASE
ONE DEGREE. MAXIMUM DEGREE IS “ F9 ” AND MINIMUM IS “ F1”.
PRESS P TO CONFIRM. THE DEFAULT SETTING IS “F5”
PRESS AND HOLD P , IT DISPLAYS “ P1 ”, PRESS TWICE, IT DISPLAYS
“P3”.
PRESS P TO SHOW CURRENT SITUATION. PRESS ONCE, IT DISPLAYS
H1 , THE PHOTO BEAM IS ENABLED. PRESS ONCE, IT DISPLAYS “H0”,
THE PHOTO BEAM IS NOW DISABLED. PRESS P TO CONFIRM AND QUIT.
NOTE: IF NOT USING PHOTO BEAM – PLEASE CLOSE THIS FUNCTION
AUTO CLOSE ON/OFF
PRESS AND HOLD P, IT DISPLAYS “P1”, PRESS THREE TIMES, IT DISPLAYS
“P4”. PRESS P TO SHOW CURRENT SITUATION. PRESS TO INCREASE THE
AUTO-CLOSE ONE MINUTE, AND PRESS TO DECREASE ONE MINUTE.
MAXIMUM DEGREE IS
“B9” AND MINIMUM IS “B0” . PRESS P TO CONFIRM. THE
DEFAULT SETTING IS “B0”
(“ B0” SHOWS AUTO-CLOSE OFF)
LOCK DOOR
WHEN YOU USE UNCOVERED TRANSMITTERS, IT IS RECOMMENDED TO
USE THE LOCK DOOR FUNCTION. WHEN THIS FUNCTION WORKS, YOU
CAN’T OPEN THE DOOR UNTIL YOU PRESS THE “UNLOCK” BUTTON FIRST
PRESS AND HOLD P , IT DISPLAYS “ P1 ”, PRESS FOUR TIMES, IT
DISPLAYS “ P5 ”. PRESS P TO SHOW CURRENT SITUATION. PRESS , IT
DISPLAYS “ LC ”, LOCK DOOR FUNCTION WORKS. PRESS , IT DISPLAYS
“ UL ”, THE LOCK DOOR FUNCTION DOES NOT WORK. PRESS P TO
CONFIRM THE FUNCTION YOU NEED.