ARC ACG4, Руководство пользователя

Страница: 18 / 28

positioning
- An oven must be fitted with a cooling fan to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut out size must be followed the indication.
o
The edges of the hob must be a minimum distance of 60mm from a side or
rear wall. NOTE: Refer to the next page a written in the gas code AS5601-2001,
for detailed clearance requirements pertaining to Built-In and Freestanding gas
appliances, especially when it relates to combustible surfaces.
o
600 mm between the highest point of the hob surface (including the burners)
and the underside of a rangehood. In case of an overhead fan, this distance
cannot be less than 750mm.
o
400 mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be at least 50mm
away from the outer edges of the hob.
45 mm
o
When instalale above a drawer or accessible cupboard a heat shield must be
fitted at least 25mm from the underside of the applaince. This is to ensure that
no hot surface are accidently touch if accessing anyhting in the drawer or
cupboard directly under the cooktop.
600mm*
400mm
*This 600mm measurement
is based from the highest
point of the cooktop in line
with AS 5601-2004 to the
bottom of a rangehood
600mm
400mm
473mm
553mm
200mm
Min,
60mm
This appliance is to be built into a kitchen unit or 600mm worktop, providing
the followng minimum distances are allowed for:
17