Arbortech PWC.FG.900.00, Инструкция по эксплуатации, Страница: 5 / 8

5
؍
$'',7,21$/6$)(7<:$51,1*6
Wear hearing protection; Wear eye protection; Wear dust
mask; Wear protective gloves.
a. Use suitable detectors to determine if utility lines are hidden in
the work area or call the local utility company for assistance.
Contact with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Penetrating a water
line causes property damage or may cause an electric shock.
b. Release the ON/OFF switch and set it to the off position when
the power supply is interrupted e.g. in case of a power failure
or when the mains plug is pulled.
c.
Do not touch grinding and cutting discs before they have
cooled down. The discs can become very hot while working.
d. Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
352'8&7'(6&5,37,21$1'63(&,),&$7,216
Read instruction manual before using the tool
Read all safety warnings and all instructions, Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
8. '(&/$5$7,212)&21)250,7<
Arbortech declares that the product described in this manual under
“Technical Specifications” is manufactured in compliance with EN
60745 standardised documents and following UK regulations:
-Supply of Machinery (Safety) Regulations 2008
-Electromagnetic Compatibility Regulations 2016
-The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012
Technical file at: Arbortech Ltd, 67 Westchester Road, Malaga, WA
6090, Australia
Sven Blicks
General Manager
,17(1'('86(
The machine is designed for grinding and sanding applications. The
machine is designed and constructed for use with attachments
supplied by the manufacturer. The machine can only be used for dry
applications without use of water.
UK AUS
Voltage 230 230-240 V
Frequency 50 50 Hz
Power 1000 1000 W
Protection Class II II II
Rated Speed 2000 – 12 000 2000 – 12 000 rpm
Tool Max. Diameter 115 115 mm
Mounting Bore Size 22.2 22.2 mm
Mounting Thread Size M14 M14 -
Weight 2.35 2.35 kg
Vibration Emission
Uncertainty k
a
h
=9.58
k=1.5
a
h
=9.58
k=1.5
m/s2
Sound Pressure Level
Uncertainty k
L
PA
= 90
k
PA
= 3
L
PA
= 90
k
PA
= 3
dB(A)
Sound Power Level
Uncertainty k
L
WA
= 101
K
WA
= 3
L
WA
= 101
K
WA
= 3
dB(A)
؍
WARNING: The declared vibration emission level represents the
main applications of the tool. However, if the tool is used for different
applications, with different accessories or insertion tools or is poorly
maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce
the exposure level over the total working period. Identify additional
safety measures to protect the operator from the effects of vibration.
$66(0%/<
؍
WARNING: To reduce the risk of serious personal injury, turn the
tool off and disconnect from the power source before making any
adjustments or removing/installing tools or accessories.
$8;,/,$5<+$1'/(
Screw the handle (2) into one of the side holes on the head of the
grinder as shown in Fig. B. Ensure the handle is secure before use.
0(7$/*8$5'
When using a grinding wheel, first install the metal guard (5) over the
collar (10) and rotate the guard on the tool so that the closed side of
the guard always points toward the operator as shown in Fig. C.
Tighten the screw (12) so the guard cannot move out of position.
)/$1*(6$1':+((/6
Mount the backing flange (7) onto the spindle (9) with the slot
orientated so that it interlocks with the spindle. Fit the disc, ensuring
it seats correctly onto the flange, then screw on the lock nut (8). Press
the spindle lock (6) and tighten the lock nut using the pin spanner (13).
For installation and operation of other Arbortech accessories please
refer to their dedicated instructions.
&+,3&$7&+(5 $1'6$1',1*3$'
When using a Sanding pad, first install the Chip catcher (17) over the
collar (10), then tighten up the auxiliary handle (2) and side screw (18).
Tighten up the sanding pad (16) over the spindle without the backing
flange.
23(5$7,21
؍
WARNING: Always read the safety instructions and applicable
regulations. To reduce the risk of injury, turn the tool off and
disconnect from power source before making any adjustments or
removing/installing accessories
a.
The electric motor has been designed for the voltage stated on
the label. Always check the power supply corresponds to the
voltage marked on the motor.
b. Always wear correct safety clothing, including ear, eye and lung
protection.
c. Follow local government safety regulations when working on
materials treated with or containing toxic substances.
d. Do not use this tool in wet conditions or in the presence of
flammable liquids and gases.
e. Check tool before using. The grinding disc must be mounted
properly and be able to move freely. Test run the power tool
with no load prior to se. Do not use damaged, out of centre or
vibrating tools.