Arbor Technology Rigid-770 Series, Руководство пользователя

Страница: 59 / 119

- 47 -
Installation & Maintenance
2. From the front panel, loosen and remove the 2 screws as marked in the
illustrations below. (And make sure the CF card door is closed.)
Rigid-770 Front Rigid-772 Front
3. From the rear panel, loosen and remove the 2 screws as marked in the
illustrations below.
Rigid-770 Rear Rigid-772 Rear
4. After the said screws are removed, proceed to dismount the top cover.
Carefully pry at the joint of the top cover and bottom cover, which locates
at about one third of the computer’s height for Rigid-772 and one fifth of
the computer's height for Rigid-770. Then completely part the top cover
from the computer.
Rigid-770 Rigid-772
Lightly pry at the joint
of the top cover and
bottom cover.
Lightly pry at the joint
of the top cover and
bottom cover.
The inside of the computer comes to view.