http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Step 6
Step 7
Step 8
4.8m x 4.8m garden pergola kit version will have
additional upright midway. Align uprights using pencil
mark and secure with 85mm screws using pre-drilled
holes. Then, attached short braces as shown in the
picture and secure it with 85mm screws
Using your assistance, lay out the two finished
frames, facing each other as shown above so that
they are approximate distance of your internal rafter
length. (Measure rafters distance between cut-outs)
Get one of the rafters ready to be slotted in place and
have your assistance support the 2 frames vertically as
shown above.
First and last rafters sit on the outside of the uprights.
Repeat this step for the other side.
