Phone number: 01945 410950 [email protected]
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Lay the tabletop upside down on a clean, flat surface
taking care not to damage it. Now line up one of the
table A-frames centrally on the tabletop as shown in
step 2.
Place one of the table A-frames centrally against the
fixing batten ensuring that the gap at the table edge is
the same on both sides.
Now, using 2 of the supplied coach screws and the pre-
drilled holes, secure the table A-frame to the fixing
batten on the tabletop.
Ensure that the brace is lined up centrally on the table
and attach it to the A-frame with a coach screw. Make
sure that the brace is still aligned centrally on the table
and affix the other end to the tabletop with a coach
screw as shown. Repeat steps 1-4 to finish the table
assembly and proceed to step 5.
