Arbor Technology EmETXe-i91M0 Скачать руководство пользователя страница 35

Страница: 35 / 68

- 27 -

BIOS

4.2.4 Trusted Computing

→←: Select Screen

↓↑: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F9: Optimized Defaults

F10: Save and Exit

ESC: Exit

Advanced

TPM20 Device Found

Firmware

Version

402.1

Vendor:

Security Device Suppoert

[Enable]

TPM 20 InterfaceType

[CRB]

Device Select

[Auto]

Enables or Disables
BIOS support for
security device. O.S.

will not show Security

Device. TCG EFI

protocol and INT1A

interface will not be
available.

Setting

Description

Security Device

Support

Enable

(default) or

Disable

BIOS support for security

device. O.S. will not show Security Device. TCG EFI

protocol and INT1A interface will not be available.

Device Select

Select the TPM device:

Options:

TPM 1.2

TPM 2.0

and

Auto

(default)

►

TPM 1.2 will restrict supoort to TPM 1.2 devices

►

TPM 2.0 will restrict support to TPM 2.0 devices

►

Auto will support both with the default set to TPM

2.0 devices if not found., TPM 1.2 device will be

enumerated.

Содержание EmETXe-i91M0





































































Результаты поиска

Содержание EmETXe-i91M0

Отзывы:

Arbor Technology EmETXe-i91M0, Руководство пользователя, Страница: 35 / 68

Результаты поиска

Содержание EmETXe-i91M0

Отзывы: