Arbor Technology ARES-1980 Series, Руководство пользователя, Страница: 66 / 83

- 56 -
BIOS
USB transfer time-
out
Use this item to set the time-out value for control, bulk, and interrupt
transfers.
►
Options: 1 sec, 5 sec, 10 sec, 20 sec (default)
Device reset time-
out
Use this item to set USB mass storage device start unit command time-
out.
►
Options available are: 10 sec, 20 sec (default). , 30 sec, 40 sec
Device power-up
delay
Use this item to set maximum time the device will take before it properly
reports itself to the host controller. ‘Auto’ uses default value: for a root
port it is 100 ms, for a hub port the delay is taken from hub descriptor.
►
Options available are:
Auto : Default
Manual : Select Manual you can set value for the following sub-item:
‘Device Power-up delay in seconds’, the delay range in from 1 to 40
seconds, in one second increments.