PO Box 2750 ANN ARBOR, MI 48106 T 800-367-6695
WWW.
ARBORSCI
.COM
©2012 ARBOR SCIENTIFIC ALL RIGHTS RESERVED
Caution: Do not start re-assembly until this is done.
10. During the belt installation process, the brush electrodes will have been moved. They should now
be re-positioned, both upper and lower, with the points of the screen wires perpendicular to the belt
and approximately 3/16" away from the belt - not any closer.
11. Re-assemble the cabinet and the upper half of the dome. Clean the outside surface of the dome
with alcohol or other non-abrasive cleaner followed by quick polish with an aerosol dusting
preparation.
Replacement belts are always readily available and may be purchased directly from our website at:
arborsci.com/van-de-graaff-replacement-belt
For more information about Van de Graaff Generators, or questions, please contact us at
[email protected], or 800-367-6695.
