5
2. Directions
2.1 Operation
After adjustment and connection the belt grinding machine is ready for use. The
grinding can take place by the contact wheel (E) or on the surface grinding table by
opening the cover (H). The lifetime of a new belt is prolonged if the grinding starts
with a light pressure.
2.2 Safety rules for stationary machines.
2.
Keep guard in place and in
working order.
.
The very good craftsman respects the tools
with which he works. He knows they
represent years of constantly improved
design. He also knows that they are
dangerous if misused.
This is the theme of a new safe-use
program for stationary power tools. The
safety rules are based on approved
practices in industrial and home shops.
3.
Ground all tools. If tool is equipped
with three-prong plug, it should be
plugged into a three-hole electrical
receptacle. If an adapter is used to
accommodate a two-prong
receptacle, the adapter wire must be
attached to a known ground. Never
remove the third prong.
4.
Remove adjusting keys
and wrenches. Form habit
of checking to see that
keys and adjusting
wrenches is removed
before turning it on.
5.
Keep work area clean.
Cluttered areas and benches
invite accidents.
6.
Avoid dangerous environment. Don’t use
power tools in damp or wet locations or
expose them to rain. Keep your work area
well lighted.
7.
Keep children away. All visitors should be
kept in a safe distance from work area.
1.
Know your power tool.
Read the ow
ner’s manual
carefully. Learn its
applications and
limitations, as well as the
specific potential hazards
peculiar to this tool.
