MODEL 1201B/C SETUP GUIDE
B1234
Arb
it
e
r Sy
st
e
m
s
Serial Number
Made in USA
ANTENNA
FIBER
COM1
RELAY
COM2
INTERNAL OPTION SPACE
POWER B
POWER A
1
I/O PORTS
2
3
ANTENNA
STATUS
Figure 3: Rear Panel
Connecting Signal Cables
1. Pluggable terminal block: Strip the insulation 1/4 inch and DO NOT tin.
2. RS-232 Ports: Null-modem cable with female DB-9 connectors required.
3. Options: Refer to manual
Connecting Power Cables
• VERIFY that the voltage level is in the correct range.
• VERIFY that the polarity is as specified on the label.
• Strip the insulation 1/4 inch and DO NOT tin.
• A fuse is located to the left of each installed power inlet connector.
Configuring with Front Panel
• Press SETUP to cycle through the menu structure.
• Press ENTER to select the menu.
• Press UP or DOWN to change the selection.
• Press ENTER to confirm selection.
• Press any of the top row keys to leave the configuration menu.
Configuring with Utility Software
Utility Software is available from www.arbiter.com
Additional Help
The operation manual is available as a free download from www.arbiter.com or to purchase.
Arbiter Systems, Inc.
·
1324 Vendels Circle, Suite 121
·
Paso Robles, CA 93446
·
USA
·
Tel: +1.805.237.3831
Fax: +1.805.238.5717
·
E-mail: [email protected]
·
Internet: http://www.arbiter.com
3
