manualshive.com logo in svg

ARB LINX LX100, Руководство по эксплуатации

Поделиться
Скачать
ARB LINX LX100 Скачать руководство пользователя страница 18

|       LX100 VEHICLE ACCESSORY INTERFACE KIT 

OPERATION GUIDE

PAGE 18

BLUETOOTH PAIRING THE DISPLAY WITH CONTROLLER

AUTO PAIRING

The easiest way to pair the display and controller is to first connect them via USB 

and perform a software update as described in the section above. Then simply 

unplug the USB cable and when the LINX Display will request permission to pair, as 

shown below.

The LINX Display and LINX Controller can communicate using either the USB or 

Bluetooth connection.  But before Bluetooth communication can be used, first they 

have to be paired.

Tap 

PAIR

 to accept the pairing. The LINX Display and LINX 

Controller are now paired and will connect via Bluetooth whenever 

in range. 

MANUAL PAIRING

If the LINX system installation is already complete and USB cable hasn’t been used 

to connect the LINX Display and LINX Controller,  and the LINX Controller is difficult 

to access, then the display and controller can be manually paired via the Bluetooth 

settings.

Note:

 Once the LINX Display and LINX Controller have been Bluetooth paired, 

the LINX Controller will become invisible to all other Bluetooth devices. The LINX 

Controller Bluetooth visibility can only be reset by resetting the LINX Controller, by 

disconnecting/reconnecting it to power.

Содержание LINX LX100




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды