2. Fitting the Rooftop Tent to your Roof Rack or Roof Bars
1. Lift the tent onto the vehicle’s roof rack or roof bars.
2. Place 8mm x 55mm bolt into the slide plate. Slide the plate and bolt into the mounting
extrusion. See Figure 3.
3. Attach the rooftop tent to your roof rack or roof bars in four places as per Figure 4. Use 2
bolts and 2 slide plates with the base plate to hug the bar. 1 set per corner.
4. Prior to tightening all the nuts, ensure that your rooftop tent is centred (side to side) on
the roof of your vehicle and that the mounting points (as far as possible) are symmetrically
positioned near each corner of the tent.
PAGE 5
Figure 4
Figure 3
