ERECTING THE CANOPY
1. The entry canopy should be erected using the two spring steel rods
included with your tent.
2. Climb half-way up the ladder, take one rod, and gently insert the straight
end (no hook) into one of the holes located to the left or right of the ladder
attachment point. (Pictured below). The hook at the top end of the rod
should be facing down.
3. Hold the rod with one hand, and with the other, hold the corner of the
canopy and insert the rod’s hook, facing down, into the metal grommet.
Repeat on other side.
4. Check the ladder is positioned correctly and enter the
Tent,
5. The window awnings can be extended using the remaining
spring steel rods
6. Hinge cover flaps can be secured to the touch tape pads
under the tent base and secure all other loose straps.
7. Repeat the process on the other side of the tent.
8. Using the two aluminum C-Channels included, please
place these in the struts section to lock the tent in case of
bad weather.
