background image

28

The additional warranty described herein may extend but shall in no way reduce any pre-existing warranty 
periods already applicable to the product.

Return Costs

If a given product is covered by the Warranty, SAF will pay the shipping costs associated with returning it 
to the customer. If a product is outside of the Warranty, the customer shall pay all costs associated with 
transmitting it to and from SAF. An estimated cost of return will be included in any repair invoice sent to 
the customer, and must be paid before SAF will return a repaired product.

Shipping & Abandonment

Any non-functioning product remaining in SAF’s possession for three months after a customer receives 
an invoice for repairs because the customer has failed to pay the invoice in question, shall be considered 
abandoned. A customer’s rights in all abandoned products shall be considered forfeit and SAF shall have 

the right to reprocess such products in any manner it sees fit.

Sole Warranty

UNLESS SAF AGREES TO ADDITIONAL OR ALTERNATE TERMS IN WRITING, THE WARRANTY DESCRIBED 
HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED TO SAF’S CUSTOMERS, AND NO ADDITIONAL 
WARRANTIES ARE GIVEN OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF 
MERCHANTABILITY, NON-INFRINGEMENT, TITLE OR FITNESS FOR A PARTICULAR PURPOSE.

CHANGES TO THESE TERMS & CONDITIONS

We reserve the right to update or change our Terms and Conditions at any time and you should check 

these Terms and Conditions periodically. Your continued use of the Service after we post any modifications 
to the Terms and Conditions on this page will constitute your acknowledgment of the modifications and 
your consent to abide and be bound by the modified Terms and Conditions.

Содержание PRO 100





































Отзывы: