CAUTION UPON INSTALL & USE
Ad
dit
ion
al
in
form
at
ion
1. Humidity
Do not install the product in the place with rain leakage or of high humidity. If the product is
leaking, it may cause damage or fire.
2. Repair
Do not disassemble or remodel the product because it may cause danger such as an electric shock.
When a problem occurs, do not attempt to repair it. Instead, contact the seller.
3. Electricity
Do not use electricity except for what is prescribed here. Using improper electricity may cause an
electric shock or danger.
4. Installation Environment
Do not install the product in a too hot or cold place. (Recommended Temperature : 15℃ ~ 35℃ )
5. Sunlight
Do not expose the camera of the product to the sun or a direct ray of light. It may cause product
damage
6. Shock or Vibration
Do not drop the product or give it a strong shock or vibration.
7. If the product does not work properly
If a problem occurs while using the product (unidentified noise, smell or smoke), stop using it and
turn the power off and contact the seller.
8. Dirt on Lens
Make sure that keep camera lenses clean and away from pollution. If it polluted by finger print or
external dirt, cleanse it with cotton stick socked with 70% Ethyl Alcohol solution or use air blower
to remove the dust. Those products are available at camera shop.
9. For After-Service
When any of the following occurs, turn the power off and have the product repaired at the place of
purchase.
i.
Power Connector is damaged
ii.
The product is leaking
iii.
Liquid is spilt over the product or it has alien substance.
iv.
Product does not work as indicated in this manual.
(Attempting to operate the product against manual may cause more serious damage.)
v.
Product is dropped to the floor and seriously damaged.