41
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
decrease
of data
Scroll
(UP /
DOWN)
Enter
selected
character
Par.
ADVANCED SETUP
"GPS RECEIVER"
The items displayed in this menu depend on the basic settings (chap. 10) and on the features of the connected receiver. The
connection of ARAG receivers, models Smart Ag - Ag Star - Smart 6 - Atlas, entails a guided pairing procedure assigning to the
monitor ONLY the suitable setup menus.
11.6.3 HDOP alarm
“HDOP” is the parameter with which the position and number of satellites in space affect the positional precision of the system (longitude and
latitude); the lower the value, the higher is the driving precision.
The precision alarm is triggered when the value of HDOP measured by the GPS receiver is above the set limit.
We recommend NOT to set values above 4.0.
11.6.4 Receiver advanced data
Shows the GPS receiver data and the type of correction.
11.6.5 Receiver update - for Smart range receivers ONLY
Allows updating the GPS receiver if the used receiver (Smart series) is not updated to the version compatible with the guidance monitor.
- Select
Receiver update
and press
OK
.
- Confirm the update by pressing
OK
again.
11.6.6 Minimum quality - for NMEA / A100 receivers ONLY
Allows selecting the minimum accuracy level requested for the GPS signal.
-
None
: no check is made on the signal accuracy level.
-
SBAS
: the accuracy level is checked by displaying an alarm if it is below the SBAS differential correction.
11.6.7 Baud rate - for NMEA receiver ONLY
Allows selecting data transmission speed.
