19
Par.10.2
Shifting
of the cursor
Quits the menu or
the data change
Confirms access to menu
or data change
Menu item scrolling or
Data increase/decrease
11.2
Language
Language
English
Fig. 29
Set the language of Bravo 180S, among those available.
>
Italian, English, Spanish, Portuguese, French, German, Polish, Croatian, Hungarian, Greek, Russian, Turkish,
Czech.
11.3
Units of measur.
Units of measur.
US
Fig. 30
Set the units of measurement used for Bravo 180S.
>
EU
(l/h, km/h, bar)
US
(GPA, mil/h, PSI)
US TURF
(applied volume = gal / 1000 square feet, mil/h, PSI)
11.4
No. of sections
No. of sections
5
Fig. 31
Set the number of installed section valves.
11.5
Total boom width
This parameter represents the nozzle actual spraying range on the ground: for example, by positioning 8 nozzles at a distance of 19.69" one from the
other, the boom section width to be set is 13.1 ft.
The displayed value (Fig. 32) represents the sum of the section width values, therefore to change the parameter it is necessary to set the width of
each boom section: the sum of the width values will be re-calculated automatically.
1
After selecting the menu
Total boom width
, press
OK
to gain access to the sub-menu to select / modify the single sections.
2
Use the keys to scroll the sections in the sub-menu
Section
until viewing the section to be modified: the section number is indicated on the top
right side of the display, whereas the first line shows the current value (Fig. 33).
3
Press
OK
to confirm the access to the modification function.
4
Enter the section width value and repeat the setting procedure for each section.
Total boom width
65.6 ft
1
Fig. 32
Total boom width : 65.6ft
Section
1/5
13.1 ft
3
2
2
Section number
Fig. 33
Valve 1
Section 1 : 13.1 ft
Section
2/5
13. ft
Fig. 34
Valve 2
Section 2 : 13.1 ft
ADVANCED SETUP
Содержание Bravo 180S Series
Страница 41: ...Notes 41...
