Arada MaxR-3210, Руководство пользователя

Страница: 58 / 114

MaxR-3210 Wireless-N Access Point User Manual
4 Arada Systems Confidential
v1.1, Dec 2009
To use the CLI from a Console Port:
1. Using the null-modem cable, connect a VT100/ANSI terminal or a workstation to the port
labeled Console.
If you attached a PC, Apple Macintosh, or UNIX workstation, start a secure terminal-
emulation program.
2. Configure the terminal-emulation program to use the following settings:
• Baud rate: 9600 bps
• Data bits: 8
• Parity: none
• Stop bit: 1
• Flow control: none
These settings appear below the connector on the back panel.
3. Press Enter . The screen shown below in Figure 3-3 should appear.
4. Enter the login name and password ( a
dmin
and password are the defaults).
After successful login, the < Access Point Name > prompt should appear. In this example, the
prompt is arada74F35E .
5. Enter
help
to display the CLI command help.
CLI Commands
The CLI commands are listed in Appendix B, “Command Line Reference .”
Figure 3-3