OPTIONAL LOG STORE & PEDESTAL
FITTING INSTRUCTIONS
BK 761 Specific
Applicable Part Numbers — LOG-HOX-LOW / LOG-HOX-TALL
PED-HOX-LOW / PED-HOX-TALL
Appliance Preparation
:
Your stove is factory fitted with the integral standard foot assembly, however if it is so
desired, this can be removed and an optional log store or pedestal stand can be fitted, so
that the appliance height can be raised.
STEP 1:
To remove the factory fitted feet assembly, it is suggested that the canopy assembly &
associated hot plate surrounds, be removed to avoid damage. Carefully lower the stove
onto its rear, taking care not to damage the rear air box and heat shield cover.
We recommend lowering the stove onto the base packing pallet, that it was delivered upon
(see upper image).
NOTE : This step is only necessary
,
when the direct air cover has been fitted.
If fitted, remove direct air cover (highlighted in blue) by following steps 2&3.
Page 2
WARNING : Health and Safety
Please consult health and safety guidelines for advice on handling heavy and / or
large items.
When lifting the appliance we recommend you always obtain assistance when handling.
Extreme Caution is advised, due to the top heavy nature of this appliance.
Side View Of
Stove on Packing
Pallet
Direct Air Cover
