Arada BK555, Руководство по установке, Страница: 2 / 16

GENERAL PRECAUTIONS
All local regulations, including those
referring to National and European standards,
need to be complied with when installing the
appliance.
Any manufacturer’s instructions must not be
taken as overriding statutory requirements.
Before any installation work is undertaken
consideration must be given to the Health and
Safety at Work Act 1974. Safe working
practices should be followed at all times.
Please consult health and safety guidelines for
advice on handling heavy and/or large items.
During installation ensure that adequate
precautions are taken to avoid unnecessary
risk to yourself or any householder. In particular
the danger from the caustic nature of fire
cement should be avoided by using these
accepted methods:
 Wear gloves when handling fire cement.

Wear goggles when chiselling or looking up
chimneys.
HEARTH
The stove should be installed on a floor with
adequate load bearing capacity. If the
existing construction does not meet this
prerequisite, suitable measures (e.g. load
distributing plate) should be taken to achieve it.
Ideally, the appliance should stand on a
constructional hearth of non-combustible
materials not less than 125mm (5”) thick
conforming to Building Regulations.
Please read carefully through this installation guide before proceeding with installation of the stove.
Should you have any questions about our stoves that are not covered in this manual, please
contact the Arada retailer in your area, or call our technical support department on 08448 567181.
Arada Installation Manual 2
WARNING
It is a legal requirement that the installation of all new or replacement, wood or solid fuel
heating appliances must obtain building control approval from your local authority. This can be
done by using a qualified heating engineer affiliated to a government approved competent
persons scheme such as operated by HETAS.
If in doubt, contact HETAS Limited either by telephone: 0845 634 5626 or visit www.hetas.co.uk
The installation of any electrical services during the installation of this boiler and associated
heating system must be carried out by a registered competent electrician.
Arada Ltd will not be responsible for any consequential or incidental loss or injury however caused.