Arad Octave Скачать руководство пользователя страница 3

3

3.0 

Items included with order:

•  One OCTAVE ultrasonic flow meter, size as indicated on the packaging box, 

pieced together into a complete compact system (flow tube plus electronics)

•  One OUTPUT module, either digital or analog (based on the customer’s order)

4.0 

Supplied Documentation:

•  Condensed installation and user manual
•  Report of factory meter settings
•  Certificate of calibration data

5.0 

Unpacking and Inspection

•  This product has been thoroughly inspected and tested before shipment and is ready for operation.
•  After carefully unpacking the meter, inspect for shipping damage before attempting to install. If any indication 

of mechanical damage is found, immediately contact the responsible transportation service and your local ARAD 
LTD. representative.

6.0 

System Descri ption and Measurement Method  

•  The OCTAVE’s measurement method is based on an ultrasonic, transit-time, dual-beam sensor which determines 

the length of time it takes an ultrasonic sound wave to travel the distance between the two sensors located on the 
meter’s body. The two sensors function as both the sender and the receiver, each one alternating these functions 
so that the ultrasonic wave travels both with and against the direction of the flow. Since the ultrasonic wave travels 
slower against the flow than with the flow, the time difference of two waves traveling with and against the flow leads 
to determining the velocity of the water

•  The OCTAVE ultrasonic flow meter is a battery-powered precision flow meter designed for linear, bidirectional flow 

measurement of water

•  Flow measurement values can be transferred through the standard digital or analog output
•  The OCTAVE can be set up for a wide range of applications

7.0 

Mechanical Data

Maximum Working Pressure
Liquid Temperature
Precision Class
Configuration 
Power Source
Environmental Protection

Display Units

Output (optional)

16

 bar                

0.1-50

°C

ISO 

4064 rev.2005

Compact - The display is built in to the unit

D size Li-battery 

-10

 years life time

IP 

68

, Ambient operation temp. 

-25

°C 

÷

 

+55

°C

Multi line 

9

 digit LC display (Programmable - m

3

USG, CuFt. Acre Feet, Flow rate and volume)
Programmable dual open collector pulse output
Powered loop 

4-20

 mA

Содержание Octave









Отзывы: