Arachnid CricketMaster 110, Инструкции и правила, Страница: 6 / 20

6
All Rights Reserved
©2014 Escalade Sports
E110ARA
For Customer Service Call 1-800-526-0451
MOUNTING INSTRUCTION
1. Choose a location to hang the board that is near an electrical outlet, and that has at least 10
feet of open floor space in front of the board.
2. Locate a wall stud, and place a mark 76 5/16
” (193.83cm) up from the floor along the stud
(see illustration above). Place another mark 15 5/16
” (38.89cm) below the first mark. Drill a
small pilot hole into each reference mark, then screw in #1 screw 10-16x1
3/4” long slotted
truss-head mounting screw (provided) into each pilot hole until the screw head is protruding
about 3/16
” (5mm) from the wall.
3. Line up the slotted mounting holes on the back of the game with the screw heads, and then
mount the game.
4. It may be necessary to adjust the screw until the board fits snugly against the wall. After the
board is mounted, the bulls‟-eye should be 68” (172.72cm) above the floor.
5.
Place a toe line 97 1/2” (248cm) from the wall as a guide for throwing distance. In
tournament play adhesive tape 2 feet long be 2 1/2 inches wide is used, but if it is not
available, a strip of household masking tape will suffice.
6.
The device is powered by an AC to DC adapter with positive center pole supplied with the
game. To connect, insert the round barrel-type power plug into the lower left side of the dart
board (as you face it) and the two-prong power adapter plug into an electrical outlet.
Also this device is equipped with battery operated option (battery not included). You may
remove the battery cover from the back & insert 4xAA cells according to the battery
placement direction as marked.
15 5/16”
(38.89cm)
76 5/16”
(193.83cm)
Make 2 marks along the wall stud:
the first 76” up from the floor,
the other 15 5/16” below the first