7
MINITune
2
User Manual
12. Coolant Fan Switches On Temperature (Coolant Fan)
According to the different engine situation, rider can set different engine temperature for fan action, and fan will switch
off when engine temperature below the setting temperature substract 5
℃
.
13. Vehicle speed gain setting (Set Speed Gain)
(Only for Vehicle with Speed Sensor into ECU)
User can set the vehicle speed gain for display the vehicle speed correctly for different chain wheel or gear rate.
Vehicle Speed Gain(0~400%), 100% is the default setting, 110% is 10% vehicle speed display increase, 90% is 10%
vehicle speed display decrease.
14. Malfunction Code Read (MalfCode)
MINITune2 can show the malf code if EFI malfunctions happen. Note some malfunction code is just detected in engine
run.
Fan Action Temp.
Coolant Fan Action Temperature
92 C
►
Exit
Change Temp.
(Press over 1sec)
Decrease Temp.
Increase Temp.
Speed Gain
90.6%
Exit
Increase value.
Decrease value.
Change Password.
(Press over 1sec)
__
__
No malf code
Page up
Page down
Exit
►
105
Vehicle speed display