Ara-Unicontrol Uniwifi, Руководство пользователя

Страница: 3 / 21

Figure 1
Once the stove is connected, we will observe the following sequences:
1 - Software version and serial number. 2 - Configuring wifi module .......
3 - Wifi module configured. 4 - In the upper line corresponds to the user's
name and the lower line corresponds to the
password. Follow the instructions that begin at
the end of this page. Once the configuration is
finished press the menu key. The CPU will
complete the test.
5 -Start test It will be done every time
reconnect the stove.
6 - Selected stove model.
7 - Checking air level in depression. In this case, it
must be equal to or greater than the value found on the
right: .53mB. 8
- Screen without activity. Indicates that the stove
is ready to light.
Establish connection with the "UniWiFi" module in your Wi-Fi network.
In a device that has Wi-Fi (smartphone, tablet, computer ...), select the following network: ARA_AP,
password: 12345679.
If your device does not display the ARA_AP network for one minute, disconnect the
stove, press and hold the decrement key (<) and reconnect the stove. Stop pressing the decrement key (<),
when the sequence number 2 appears on the screen.
Check if your device shows the ARA_AP network. Then open the browser and enter the following address in
the search bar IP: 10.10.100.254
3