ARA Pharmaceuticals First Canadian Health SPIRIT, Руководство владельца

Страница: 10 / 24

18 www.arapharma.com www.arapharma.com 19
Checking the System
You may check your meter and test strips using
the First Canadian Health SPIRIT Control Solution
(control A and/or B). The First Canadian Health
SPIRIT Control Solution contains a known amount of
glucose and is used to check that the meter and the
test strips are working properly. The test strip vials
have First Canadian Health SPIRIT Control Solution
ranges printed on their labels. Compare the result
displayed on the meter to the First Canadian Health
SPIRIT Control Solution range printed on the test
strip vial. Before using a new meter or a new vial of test strips,
you may conduct a control solution test following the procedure
on pages 20 ~ 21.
Notes:
• Use only the First Canadian Health SPIRIT Control Solution.
• Check the expiration dates printed on the bottle. When you
first open a control solution bottle, record the discard date
(date opened plus 3 months) in the space provided on the
label.
• Make sure your meter, test strips, and control solution are at
room temperature before testing. Control solution tests must
be done at room temperature (20 ~ 25°C, 68 ~ 77°F).
• Before using the control solution, shake the bottle, discard
the first few drops and wipe the tip clean.
• Close the control solution bottle tightly and store at a
temperature of 8 ~ 30°C (46 ~ 86°F).
You may do a control solution test:
• When you want to practice the test procedure using the
control solution instead of blood,
• When using the meter for the first time,
Note:
At any stage, if the S button is pressed for 3 seconds,
setting mode will finish and the meter will be turned off. Press
and hold to scroll through numbers quickly.
Step 9 Setting the ‘Test Result Reset’
(Deleting all the saved test results)
In this mode all the test results stored in the
meter can be deleted. Please note that if you
select YES, all the stored test results will be
deleted and cannot be restored.
After the beeper mode is set, press the S
button to enter the ‘Test Result Reset’ mode.
The ‘dEL’ character will blink on the screen.
Press or to alternate between ‘YES’ or ‘no’.
To delete all the stored test results, press the
S button while the screen displays ‘YES’. Then,
all the test results stored in the meter will be
deleted and the screen will be similar to the
picture on the right.
If you do not want to delete the results,
press the S button while the screen displays
‘no’. Then, the screen will return to step 2.
See page 14.