AR 10031732, Руководство по эксплуатации и обслуживанию

Страница: 45 / 62

Model 4000TP2G4
Rev A 23
3.7 REMOTE IEEE-488 OPERATION
The TWTA is provided with an IEEE-488 interface that permits remote emulation of OPERATE,
STANDBY, and RESET push-buttons as well as access to parameter measurements, system faults, gain
adjustment and control unit status. The following tables summarize the commands and the return codes.
Table 3-3. Catalog of IEEE-488 Commands
Command Function Units Response format
RDSTAT Returns status code of processing of previous command (see
Table 3-4)
STATUS=[ ]
RDFLT Returns system fault code (see Table 3-5) flt=[ ]
OPERATE; Emulates OPERATE push-button
STANDBY; Emulate STANDBY push-button
POWER:OFF; Emulate STANDBY push-button
SYSTEM:ON; Emulates pressing the System ON button from System OFF
(Exit Sleep Mode)
SYSTEM:OFF; Emulates pressing the Power Save button. (Enter Sleep
Mode)
RESET; Emulates RESET softkey
RDS/N Returns serial number s/n=[ ]
RDCONHR Returns console hours ConHr=[ ]
RDRFHR Returns RF hours RfHr=[ ]
RDEK1 Returns cathode voltage, HPA1 KV Ek=[ ]
RDEK2 Returns cathode voltage, HPA2 KV Ek=[ ]
RDEB1 Returns collector voltage, HPA1 KV Eb=[ ]
RDEB2 Returns collector voltage, HPA2 KV Eb=[ ]
RDEG1 Return grid voltage, HPA1 V Eg=[ ]
RDEG2 Return grid voltage, HPA2 V Eg=[ ]
RDEF1 Returns heater voltage, HPA1 V Ef=[ ]
RDEF2 Returns heater voltage, HPA2 V Ef=[ ]
RDIF1 Returns heater current, HPA1 A If=[ ]
RDIF2 Returns heater current, HPA2 A If=[ ]
RDIW1 Returns helix current, HPA1 mA Iw=[ ]
RDIW2 Returns helix current, HPA2 mA Iw=[ ]
RDTMPTWTHPA1F Returns TWT temp (°F), HPA1 °F TWTHPA1F=[ ]F
RDTMPTWTHPA2F Returns TWT temp (°F), HPA2 °F TWT HPA2F=[ ]F
RDTMPTWTHPA1C Returns TWT temp (°C), HPA1 °C TWTHPA1C=[ ]C
RDTMPTWTHPA2C Returns TWT temp (°C), HPA2 °C TWTHPA2C=[ ]C
RDTMPPSHPA1F Returns power supply temp (°F), HPA1 °F PSHPA1F=[ ]F
RDTMPPSHPA2F Returns power supply temp (°F), HPA2 °F PSHPA2F=[ ]F
RDTMPPSHPA1C Returns power supply temp (°C), HPA1 °C PSHPA1C=[ ]C
RDTMPPSHPA2C Returns power supply temp (°C), HPA2 °C PSHPA2C=[ ]C
RDTWTOTF Returns TWT overtemp warning setpoint (°F) °F TWTOTF=[ ]F
STWTOTF Sets TWT overtemp warning setpoint (°F) °F
RDTWTOTC Returns TWT overtemp warning setpoint (°C) °C TWTOTC=[ ]C
STWTOTC Sets TWT overtemp warning setpoint (°C) °C