5
Maintenance and replacement of cartridge
Maintenance
•
Replacement filter is located inside of the filter upper- and lower cover. Open the cover
by turning the upper cover with hands until it dismantles. Oppositely the cover is
closed in a same way, but do not use excess force to avoid damage.
•
Replacement filter dismantles by pulling it out and new filter is placed by pushing it,
until you can feel it to be tight. Filter has O-ring gasket, which holds it on place tightly.
Note. It is not acceptable to wash replacement filter. Also avoid removing it without a reason, to avoid
bacterial contamination of clean water surface (Where purified water comes out). If you remove the
replacement filter, for example for time of product cleaning or washing, be sure that clean water surface
does not touch other surfaces. If necessary, to remove, you can protect the clean water surface for example
with clean plastic wrap.
Caution
Do not use steel wire brush, cleaning agents or corrosive liquids (e.g. gasoline or alcohol, etc.) when
scrubbing the cartridge. These substances may cause product rupture, scars, discoloration or deformation.
It cannot remove dissolved salt in water, as there is no residual chlorine in the filtered water, bacteria are
easy to reproduce.
Please use the filter as often as you could.
Cleaning
You can wash the product with normal dishwashing liquid or in the dishwasher. Before wash, remove all
silicone or rubber gaskets and wash those separately without cleaning agents. Use only fingers under the
water flow or with mild dishwashing liquid.
For washing the product, remove the filter cartridge and dismantle filter upper cover, filter lower cover,
housing and remove components I, F, G and H.
FILTER CARTGIDGE CAN NOT BE WASHED,
Materials and recycling
Plastic material of the product is ABS and it contains some metal parts, such as screws and some rubber or
silicone gaskets.
Replacement filter media contains also minor amount of metal alloy (KDF55) and active carbon.
