First press the + or – adjust button to set hour, then press “ ” again to set the minute.
The timer will countdown when it meets the setting temperature.
4. Press the “
” icon to confirm the setting and the unit will work. If you want to change the setting, press and hold the“ ” icon for 3 seconds, and then
repeat the setting as above.
The unit will stop automatically when it runs out of time and an “END” icon will show on the screen.
5. Press and hold the “
” icon for 3 seconds to stop.
Maintenance
• Always turn off and unplug the unit.
• Internal service work must be performed by certified personnel only.
• Make sure system is at room temperature.
Check for signs of damage including pulled cord or physical damage to system or heaters. If any signs of physical damage are found, please send back to factory