Aquatronica ACQ210-D, Инструкция по эксплуатации

Страница: 8 / 16

IsACQ210D-0 Rev. 250907-2 8 - 16
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: service@aquatronica.com
Data Record
The Data Record graphically displays variations in the
conductivity (density) during the previous 24 hours with
a minimum interval of 30 minutes (Ex. Fig. 13).
To display the data, proceed as follows:
Main screen

Main menu

Density

Data Record.
• Using the

keys, select the maximum (MAX), mini -
mum (MIN) or current conductivity (density). Using the

keys, move within the chart to view the conductivity
of a given time. Press “ Enter ” when finished.
Alarm
A visual or acoustic alarm can be set to notify the user
if the conductivity level goes below or above the “ Less
than ” or “ Greater than ” values (Ex. Fig. 14).
If the conductivity value exceeds these limits, the con -
ductivity value on the main screen will blink if the alarm
is set to “ No Sound ”.
If the alarm is set to “ Sound ”, the value will blink, an
acoustic signal will sound and the icon will appear
on the main screen.
To program this function, proceed as follows:
Main screen

Main menu

Density

Alarm.
• Select the desired option using the

keys:
OFF = alarm disabled
Sound = alarm and acoustic signal enabled
No Sound = alarm enabled and acoustic signal disa -
bled
• Select “ Less than ” using the

keys and then
“ Greater than ” and with the

keys program the
desired conductivity to set the limits beyond which the
alarm will be enabled.
After programming the various settings, press “ En-
ter ”.
English
Current value
11/06 9:30 1.0232
(Fig. 13)
(Fig. 14)
Alarm
OFF
Less than: 1.0220
Greater than: 1.0260