2
w w w . a q u a t i c l i f e . c o m
OPERATING GUIDELINES
DO NOT
use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the unit.
The maximum incoming water pressure for the
unit is 80 PSI.
If the pressure is more than 80 PSI, a pressure regulator
is required.
DO NOT
operate the unit unattended.
WATER SUPPLY INSTALLATION
This Aquatic Life TI Filter Unit includes a special
½
” Under
Sink Water Line Adapter to make it easy to tap into your
existing cold water plumbing under your sink.
Hand tightening this adapter is usually sufficient. However,
if needed, use a 1
¼
" adjustable wrench.
Connect To
Cold Water
Supply Only
Model: 540372
Twist-In 2-Stage Water Filtration Unit
Installation, Operation & Maintenance Guide
Tools & Materials Recommended for Installation
1 ¼” Adjustable Wrench
Electric Drill
1
/
8
”, ¼” and ½” Drill Bits for metal
(for faucet hole)
Masking Tape & Pencil
Screwdriver
Teflon Tape
Contents (Model #540372)
1
TI Module
(two heads on metal bracket)
1
Easy-Tap Chrome Faucet
1
TI Sediment Filter Cartridge
1
Blue Tubing, ¼” x 4 FT.
1
TI Carbon Block Cartridge
1
Yellow Tubing, ¼” x 4 FT.
1
Under Sink Water Line Adapter
(½” Female x ½” Male x ¼”
Press Fit)
1
Set of Mounting Screws
1
¼” Manual On/Off Valve
1
Installation, Operation
and Maintenance Guide
