Purescape 748
AquateX
Bathtub
TM
INSTALLATION SEQUENCE continued
•
Picture 4:
the water outlet pipe should be
connected.
•
Picture 5:
when the installation is completed,
the bathtub is taken down from the supports
( ie 2 x 4x4's).
If necessary, installation is completed by
applying silicone at several points between
the bottom panel and floor.
Fill the tub with water and check for any leaks
around the tub bottom.
4
5
Use 1.5” flanged
brass tube with
BDWOF waste.
Please refer to
our kit installation
guide on page 6
