Aquatica Digital A70D, Руководство по эксплуатации

Страница: 8 / 19

Page 5
1- SHUTTER RELEASE LEVER: Pulling the shutter release
lever back part way activates the camera meter and auto
focus. Pulling the lever back all the way fires the camera.
2- QUICK CONTROL DIAL ACCESS KNOB: It rotates clockwise
and counters clockwise. It can be used alone or in combination
with other controls to select or set various camera functions
or modes. Refer to your camera manual for in depth use.
3- MAIN DIAL ACCESS KNOB: Rotates clockwise and
counter clockwise. Use alone or in combination with other
controls to select or set various camera functions or modes.
In “Manual” this controls the shutter speed settings. Refer to
your camera manual for in depth use.
4- ISO: Press on lever to engage the ISO speed value button
of the camera
5- ACCESSORY BULKHEAD (1/2 INCH): This bulkhead
passthrough hole can be used for mounting accessories
such as a remote trigger, a vacuum valve or a monitor.
6- MAIN BULKHEAD CONNECTOR: This bulkhead connector
is normally used as the main connection, configuration may
vary according to an owner’s preference, (see page 11)
7- SECONDARY BULKHEAD CONNECTOR: This bulkhead
connector is normally used as the secondary connection,
configuration may vary according to an owner’s preference,
(see page 11)
8- ACCESSORY BULKHEAD (16MM): This bulkhead
passthrough hole can be used for mounting accessories
such as a remote trigger, a vacuum valve or HDMI monitor
9- FOCUS/ZOOM KNOB: Turning will rotate the attached
gear mounted to the zoom mechanism or focus ring of a
lens.
10- FOCUS/ZOOM KNOB RELASE DISC: Lifting and rotating
this disc to its resting post, will retract the pinion gear (# 11);
doing so, along with pulling the lens release lever outward
(# 12) will allows the camera and lens, with a gear attached
to it, to be removed from the housing as a single unit.
11- FOCUS/ZOOM PINION GEAR: This gear connects and
operates the focus or zoom gear attached to the lens.
12- LENS RELEASE KNOB: It Activates the lens release
button on the camera allowing easy removal of the lens, pulling
this out along with the zoom knob release disc (# 10) will
allows the camera and lens to be pulled out from the housing
as a unit.
13- LENS RELEASE KNOB LEVER: Applies pressure on
the camera lens lock button.
14- LED MOUNTING HOLE: this mounting hole is provided
for the moisture alarm/vacuum sensor warning LED.
15- QUICK RELEASE CAMERA TRAY: Used to attach the
camera and slide it in place inside the housing.
16- CAMERA MOUNTING SCREW (1/4”-20): Used for attaching
the camera to the Quick Release Tray.
17- BAYONNET MOUNTING FLANGE: allows the mounting
of different ports and extension rings on the housing.
18- PORT RELEASE MECHANISM LEVER: Pressing on
this lever will release the locking mechanism when the removal
of a port or extension is needed.
19- ON/OFF SWITCH LEVER: Rotate to turn the camera
power ON or OFF.
20- LIVE VIEW / MOVIE SELECTOR SWITCH: Rotate left
or right to select Live View or Movie mode.
21- FLASH UP BUTTON: Push to raise the integrated flash
of the camera (used with –OPT and –HYB version)
22- FLASH DOWN LEVER: Pull to lower the integrated flash
of the camera (used with –OPT and –HYB version)
23- START/STOP: MOVIE BUTTON: This oversized red button
activates recording in the video mode.
24- AF-ON / STAR ACCESS LEVER: This lever can be pull
outward or inward to access both the AF-ON feature and the
Star customizable button, theses are important controls for
video shooting and care should be taken to fully understand
their working and subtleties.
25- AF-ON / STAR ACCESS LEVER ROTATING COLLAR:
Pull the AF-ON / STAR Lever and rotate this collar into
position, to select access to the AF-ON or the STAR button
of the camera.
26- QUICK CONTROL BUTTON: Press to activate the LCD
menu display. You can then navigate using the Multi controls
buttons array (# 29) in combination with the Quick Command
Controls (# 2) and/or Main command control (# 3).
27- PLAYBACK BUTTON: Press to activate the monitor and
review images.
CONTROLS IN DETAIL