A Q U A T E C E Q U I P M E N T . C O M
AP300SP / AP960SP / AP1360SP
SOLAR PANEL & SUBMERSIBLE PUMP KIT
TROUBLESHOOTING
Problem
Reason
Solution
Water Pump Not
Working
No Power
Check that the plug is connected
and turned on
Impellor is blocked with
sludge or limescale
Clean the Impellor as per
the instructions
Running without sufficient water
Submerse the equipment underwater
then plug in. Refill if necessary.
Blocked Impellor chamber or ceramic
shaft is broken
Clean the Impellor. Check for ware.
Replace if necessary.
Water Pump is noisy
Blockage in pump
Clear the blockage
Impellor & Shaft worn out
Replace Impellor & Shaft
Impellor broken
Replace Impellor
Flow adjuster set to minimum
Open the flow adjuster and allow
water to flow
Unit inlet is blocked or the water
pump outlet is blocked
Clear all blockages
The height to which you are pumping
is too high for the given model of
pump.
Select a bigger model of pump
AP300_960_1360 Instructions.indd 9
31/5/18 12:25 pm
