AquaSure AS-PR100P Скачать руководство пользователя страница 28

26

www.

AQUASURE

USA

.com

818 N Mountain Ave #203c, Upland, CA 91786   |   800.661.0680   |   [email protected]

MANUFACTURER’S WARRANTY

1-YEAR LIMITED WARRANTY

For AQUASURE Drinking Water Systems

AQUASURE Drinking Water Systems warrants product to be free from defects in material and 
workmanship for a period of twelve (12) months from the date of purchase. During this time, we will 
repair or replace, at its option, any AQUASURE Drinking Water System. Please request and RMA 
and upon RMA approval return the AQUASURE Drinking Water Systems and we will either make the 
necessary repairs or, if it is determined that a replacement is required, we will provide a replacement 
part. This warranty does not include shipping and handling charges which will be collected from you by 
the dealer. Parts repaired or replaced under this one (1) year warranty will be covered under warranty 
to the end of the original one (1) year warranty period. This warranty is also subject to the conditions and 
limitations outlined under the heading “General Conditions and Limitations” section.

ONE-YEAR LIMITED PRORATED WARRANTY

For Structural, Hardware and Electrical Components

AQUASURE Drinking Water Systems warrants the structural, hardware, and any electrical components 
to be free from defects in material and workmanship for a period of one (1) year pro-rated from the date 
of purchase. During this time, we will repair or replace, at its option, any defective parts covered by the 
warranty. Defective part(s) will need to be returned to  AQUASURE. We will either make the necessary 
repairs or, if it is determined that a replacement is required, we will provide a replacement part. We will 
then return the part to the buyer. This warranty does not include shipping and handling charges which 
will be collected from you. Parts repaired or replaced under this one (1) year pro- rated warranty will be 
covered under warranty to the end of the original one (1) year prorated warranty period. This warranty 
is also subject to the conditions and limitations outlined under the heading “General Conditions and 
Limitations” section.

One-Year Limited Warranty for fittings, tubing, valves, flow-lok and shok blok.

AQUASURE Drinking Water Systems warrants these parts to be free from defects in material and 
workmanship for a period of one (1) year from the date of purchase. During this time, we will repair 
or  replace,  at  its  option,  any  defective  parts  covered  by  the  warranty.  The  warranty  may  be  verified 
using date codes in addition to purchase receipts and AQUASURE Drinking Water System’s database 
of serial number sales date. We will advise you whether the defective item needs to be returned to the 
AQUASURE Drinking Water Systems dealer you purchased the equipment from for failure analysis. 
Replacement parts provided under warranty will be sent to your AQUASURE Drinking Water Systems 
dealer. Parts replaced under this one (1) year warranty will be covered under warranty to the end of 
the original one (1) year warranty period. This warranty is also subject to the conditions and limitations 
outlined under the heading “General Conditions and Limitations” section.

General Conditions and Limitations

None of the above warranties cover damage caused by improper use or maintenance, accidents, acts 
of God or minor scratches or imperfections that do not materially impair the operation of the product. 
The warranties also do not cover products that are not installed as outlined in the applicable Owner’s 
Manual. AQUASURE Drinking Water Systems System warranty will be deemed null and void if any of the 
product labels are removed. The limited warranties described above are the only warranties applicable 
to the AQUASURE Drinking Water Systems products. These limited warranties outline the exclusive 
remedy for all claims whether based on contract, tort (including negligence), strict liability or otherwise. 
Disclaimer of warranties. Except as expressly warranted in writing by, the goods sold by AQUASURE 
are purchased by the buyer “as is.” AQUASURE does not warrant that the goods are of merchantable 
quality or that they can be used for any particular purpose. Except as expressly warranted in writing by 
AQUASURE, AQUASURE makes no representation or warranty of any kind with respect to the products.

Содержание AS-PR100P

































Отзывы: